After Sales Service and Cleaning Advice from Lakeland Spas
Lakeland Spas want you to be totally satisfied with your hot tub for many years to come and we know that a large part of your satisfaction comes from having a product that is reliable, efficient and continues to work exactly like the day you bought it. This is why Lakeland Spas is recommending you have your spa serviced to keep it in optimum condition.
Lakeland Spas incorporates a 21 POINT ANNUAL HOT TUB SERVICE CHECK LIST which can be found below. In this list you hot tub is thoroughly INSPECTED, CLEANED and SANITISED. Remember that early detection of problems can prevent more considerable problems in the future.
Why not relax and let Lakeland Spas take car of your hot tub maintenance? Our service is carried out by experience professionals and is available for £199 + VAT.
Contact us today by clicking HERE and let us clean your hot tub, making it as good as new.
21 POINT ANNUAL HOT TUB SERVICE CHECK LIST
Remove filters and perform visual check of filter condition
Check plumbing including pipe and heater unions and isolation valve connections for integrity and identify where possible any leaks present
Check all worn or defective joint o-rings or gaskets
Check jet body to hot tub shell joints for integrity where possible any leak present
Run all pumps to ensure satisfactory operation
Check operation of system diverter valves, if fitted, and air control operation
Check all jets for satisfactory operation - ensure they turn off and on if applicable
Operate air blower, if fitted, and check sastifactory operation. Visually check that all the air injectors are allowing air through
Check visually all equipment interconnecting wiring for integrity and insulation
Check the control system and topside for operation of each function - Pumps - circulation pump - blower (if fitted) - filer cycle - heating capability - mode system
Deep clean and sanitise the hot tub plumbing and pipe work system including pump wet end and heater tube
Test the hot tub LED and lighting system
Drain all water from the hot system
Wipe clean hot tub shell surface
Refill with clean water to the required operating level
Fit new or cleaned filters into the hot tub skim filter (Filter used will be customers own pre-cleaned or new - only if purchased)
Sanitise hot tub adding ph - alkalinity - chlorine or bromine and hardness if required
Check operation of all spas equipment from the control touch pad. Check operation of the heater and mode functions
Check and clean all GLP valves
Wipe down acrylic rim
Clean down and apply waterproofing to the hot tub cover and check the locks
If you have any questions on any of these points then please contact us by clicking HERE and we will be happy to help you with the cleaning of your hot tub.
